[RESOLVED] Unwrella not installing properly

[RESOLVED] Unwrella not installing properly

Postby GRiessen » 16 Mar 2009 16:59

Hi, I installed and tested this fantastic plugin on my home machine over the weekend, and now want to get it installed here at work so I can show proof-of-concept to get full licenses here. The home install worked with no problems. But the install here is giving me an error about the currently installed Microsoft DirectX version...which is incorrect, as it says I need to have the latest DirectX 9 version installed, which I do. Ignoring that install error (the install continues and completes fine otherwise) causes Max to give a start-up error:
DLL<C:\Program Files\Autodesk\3ds Max 2009\PlugIns\unwrella2_MAX@))(_x64.dlm>failed to initialize.
Error code 126 - the specified module could not be found.


Note that this is a Trial Version of 64-bit Max until our next batch of licenses comes in and IT can go around and get us all upgraded, if that could possibly make a difference?

If I ignore the error, Unwrella simply does not show up in the Modifier list.


Here is the DXDiag info from the system:
------------------
System Information
------------------
Time of this report: 3/16/2009, 09:45:52
Machine name: COUNTRYJOE
Operating System: Windows XP Professional x64 Edition (5.2, Build 3790) Service Pack 2 (3790.srv03_sp2_gdr.080813-1204)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP xw8600 Workstation
BIOS: Default System BIOS
Processor: Intel(R) Pentium(R) III Xeon processor (4 CPUs), ~3.0GHz
Memory: 8192MB RAM
Page File: 825MB used, 8982MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.3790.3959 64bit Unicode

------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.

--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)

---------------
Display Devices
---------------
Card name: NVIDIA Quadro FX 5600
Manufacturer: NVIDIA
Chip type: Quadro FX 5600
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_019D&SUBSYS_040910DE&REV_A2
Display Memory: 1536.0 MB
Current Mode: 2560 x 1600 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
Driver Name: nv4_disp.dll
Driver Version: 6.14.0011.6947 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 3/24/2008 11:35:00, 8462848 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 3/24/2008 11:35:00, 9525888 bytes
Device Identifier: {D7B71E3E-42DD-11CF-4D68-022403C2CB35}
Vendor ID: 0x10DE
Device ID: 0x019D
SubSys ID: 0x040910DE
Revision ID: 0x00A2
Revision ID: 0x00A2
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
GRiessen
 
Posts: 3
Joined: 16 Mar 2009 16:48

Re: Unwrella not installing properly

Postby GRiessen » 16 Mar 2009 17:17

Okay, I did re-install the latest DX and it seems to load fine now.

BUT!

The Unwrella helper script makes Max hang. I can define the pelt seams fine with UVW Unwrap, then start the script, but as soon as I press the Use Pelt Seams button, it opens a full-screen blank UVW Edit screen and hangs--no grid or anything, just the base-gray window. No dialogues or menus respond, can't minimize the UV window nor even Max itself.

It's the ability to define the seams and use Unwrella to keep the pixel ratios equal and then bring the whole thing into MudBox which was the selling point for me over the weekend, working with this. Hopefully it's a small problem!

Thanks!
--guy
GRiessen
 
Posts: 3
Joined: 16 Mar 2009 16:48

Re: Unwrella not installing properly

Postby Igor Posavec » 16 Mar 2009 17:29

Hallo guy,

thanks for your inquiry: the problem is easy to solve - when you draw your blue seams on the object in UVW Unwrapp, you have to have it selected it when you press the MaxScript. This is the Limitation of Max, it can convert the blue lines to seams only if you are in this UnwrapUVW modifyer. :)
We will try to implement it in the next versions directly into unwrella.

best regards
--
igor posavec
CEO, 3d-io games & video production GmbH
igor@3d-io.com
Igor Posavec
3d-io staff member
 
Posts: 710
Joined: 02 Oct 2008 14:25

Re: Unwrella not installing properly

Postby GRiessen » 16 Mar 2009 19:34

Working now, thanks!
GRiessen
 
Posts: 3
Joined: 16 Mar 2009 16:48

Re: Unwrella not installing properly

Postby Javadevil » 03 Apr 2016 00:40

Hi searched and found this thread, I am getting the same error.
I have DirectX 11. installed so I don't think thats a problem.
Also if I do need uninstall re-install directx how do I do that ?
There doesn't seem to be listed in the Programs install.
Javadevil
 
Posts: 1
Joined: 03 Apr 2016 00:37

Re: Unwrella not installing properly

Postby Igor Posavec » 04 Jul 2016 15:06

Hello

as stated, it does not matter if you have DirectX11. You Need to install DirectX 9c.

Receiving an error message ‘Error code 126 – The specified module could not be found’ when you try to start 3ds Max with Unwrella indicates that you do not have Microsoft DirectX9c installed on the computer you’re trying to use Flatiron on.
You might already have DirectX10 or later installed on your computer. This is not a full replacement for version 9c. DirectX9 and DirectX10 can be installed next to each other on the same computer. You will not ‘downgrade’ or lose any DirectX10 capabilities by installing DirectX9c.

You can download Microsoft DirectX9c from the Microsoft download center here: http://go.microsoft.com/fwlink/p/?LinkId=159853
--
igor posavec
CEO, 3d-io games & video production GmbH
igor@3d-io.com
Igor Posavec
3d-io staff member
 
Posts: 710
Joined: 02 Oct 2008 14:25


Return to Unwrella

Who is online

Users browsing this forum: No registered users and 1 guest

cron